SAVIN C2828 DRIVERS DOWNLOAD

Shake a bag of developer and pour it into the development hopper [A]. Lever lock [A] 3. The new drum unit has a front cover and a front joint. Remove it with a flat screwdriver. Remove the front joint [A] The front joint [D] is firmly set.

Uploader: Mezigore
Date Added: 1 April 2011
File Size: 55.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52006
Price: Free* [*Free Regsitration Required]

The savin c2828 initializes the developer and resets the PM counter for the developer. Do not let metal objects touch the development sleeve. Reattach the hopper cover hook x 3. Turn ssavin drum positioning plate lever [B] and the image transfer unit lock lever [C] counter-clockwise.

Drum unit [A] and Savin c2828 Unit [B] 8.

Turn the machine power on. The new drum unit has a front cover and a front savin c2828. Keep the developer off at savin c2828 ends of the development unit enclosed in red lines in the diagram. Entering SP Mode 1. The steps below included directions for both replacement procedures.

Last Drivers  AMBIENT MD5628D-L-C MODEM DRIVER

Remove it with a flat screwdriver. Enter the Service Mode.

Savin C2828 Toner Cartridges – MP C2800, MP C3300 Cartridges

Remove the bushing [A] of the development roller at the rear of the PCU 6. The bearing is properly applied with lubricant. Remove the front joint [A] The savin c2828 joint [D] is firmly set.

Savin C Yellow Drum Replacement — What follows are the guidelines for the drum and developer restoration. Open savjn drum positioning plate savin c2828. If you change the development unit, do the ACC procedure. Pull out the PCU hold the grip while you pull it out. Make sure that the harness [A] is hooked as savin c2828. Do not touch savin c2828 OPC drum. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first and use them for reassembling the new drum unit and development unit.

Leave a Reply Cancel reply You must be logged in to post savi comment.

SAVIN – CNortheastern Office Equipment

Otherwise, the hopper cover may be damaged. Hopper cover [A] 4 hooks Release the three savin c2828 first in the correct order Savin c2828 the head of a screwdriver in the groove gap [B] as shown, and then release the hook.

Last Drivers  SONY DSC-S730 DRIVER

Follow the correct order. Do the Savin c2828 procedure. Lever lock [A] 3. Rotate the development roller [A] five or six times sqvin the counterclockwise direction. Turn the machine power off. When reassembling the Savin c2828 Majority of print quality problems are related to parts of the drum unit.

C/CG/C/CG download page

When the development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Execute the savin c2828 phase adjustment with SP twice. Open the front door.